Aftershokz Aeropex

charging: the LED indicator turns from red to blue when charging is complete.
to pair: start with your headphones powered off. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.

Multifunction Button

Function	Action	Audrey Says
Play / pause music	Click once	One beep
Skip to next song	Double-click while music is playing	One beep
Back to previous song	Three-click while music is playing	One beep
Answer call	Click once	Two beeps
End call	Click once	One beep
Answer call waiting and hang up on current caller	Press and hold for 2 seconds	One beep
Reject a call	Press and hold for 2 seconds	Two beeps
Prompt device’s voice assistant	Press and hold for 2 seconds	Device beep
Redial last number	Double-click (when idle)	Redial last number

Function	Action	Audrey Says
Power on	Press and hold volume+ for 2 seconds	Welcome to AfterShokz
Power off	Press and hold volume+ for 3 seconds	Power off
Mute	Press and hold both buttons for 2 seconds while on a call	Mute On or Mute off
Change EQ setting	Press and hold both buttons for 3 seconds while music is playing	EQ changed
Check battery status	Click the volume+ or volume- button while music is paused	Battery high/Battery medium/Battery low/Charge me
Adjust volume	Click the volume+ or volume- button to adjust volume while music is playing	One beep

Multipoint pairing allows Aeropex to be connected to two devices at once, allowing users to seamlessly transition between the two.

Start with your headphones powered off.
Press and hold volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
Press and hold the multifunction button and volume+ button for 3 seconds. Audrey says “multipoint enabled.”
Open your first device’s Bluetooth® menu and select “Aeropex by AfterShokz.” Audrey says “connected”.
Turn your headphones off.
Re-enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
Open your second device’s Bluetooth® menu and select “Aeropex by AfterShokz.” Audrey says “connected.”
Turn your headphones off.
Turn your headphones on. Your headphones are now connected to both devices.
To turn multipoint pairing off: Press and hold the multifunction button and volume- button for 3 seconds. Audrey says “multipoint disabled.”

bit.ly/ASMultipoint